Better Than Low Flow
|
   |
 |  |
As with all High Sierra Showerheads®, they feature a 1.5 gpm* flow rate, maintenance free quality, solid metal construction, and patented uniform droplet spray nozzle. In addition, these models are fitted with a stainless steel set screw located in the shower head nut. After installation, the set screw is driven into the shower arm using a 1/16” allen type wrench. This feature makes it impossible for the shower head to be removed from the shower arm by hand or without special tools.
GO TO OUR PUBLIC-USE (RECREATIONAL) SHOWERHEADS STORE
Architect/Contractor Spec Sheet Commercial Showerheads - Chrome Finish (1124 KB)
Architect/Contractor Spec Sheet Commercial Showerheads - Nickel Finish (1125 KB)
* Accuracy of flow rate is ± 10% between 30 psi and 80 psi
Testimonials
Shower Head Testimonial from the facilities manager of a large university:
"We have installed about 1500 of your 1.5 gpm shower heads to retrofit most of the shower stalls of our residential buildings. Our staff had tested the performance of different heads in the market and chose yours for its full flow feeling and usability such as washing the shampoo off.
"The conversion was completed before the Fall, and after two months of use we have not heard of any dissatisfaction with them.
"At the University of California at Santa Cruz we have a mandate to save a large percent of water, and this conversion from 2.5 gpm to 1.5 gpm will go a long way towards that." -- Tarun B.”
Other institutions of higher learning with showerhead retrofits by High Sierra Showerheads include Penn State U, SCAD, and California Polytechnic U.