Better Than Low Flow
... It's the Right Flow!

Our Tamper-Proof, Vandal-Resistant 1.5 GPM* Shower Heads Are Perfect for Correctional Institutions



1/2 inch 20 UNF Male $39.95 (Less Quantity Discounts)3/4 inch 16 UNF Male $39.95 (Less Quantity Discounts)1/2 inch 14 NPT Male $39.95 (Less Quantity Discounts)1/2 inch 14 NPT Female $35.95 (Less Quantity Discounts)Retrofits Powers Wall Mounts 141-381 and 141-868 $49.95 (Less Quantity Discount)
Specifications:

FCS-100-VRM1220   FCS-100-VRM3416 FCS-100-VRM1214  FCS-100-VRF1214  FCS-100-VRM141P  
 1/2"-20 UNF male threads, retrofits Willoughby™ WSH 5 or equivalent  3/4"-16 UNF male threads, retrofits Willoughby™ WSH-7 or equivalent  1/2"-14 NPT threads, retrofits Acorn™ Penal
showerhead or equiv.		  1/2"-14 NPT female threads, retrofits all female thread 1/2"-14 NPT, adjustable trajectory, stainless steel set screw (click for a spec sheet)
  Retrofits Powers™ institutional showerhead wall mounts 141-381 and 141-868

Our penal shower heads were designed specifically for prisons, jails, correctional facilities, or any public application where tampering, safety, and maintenance are important issues. Their 1.5 gpm* flow rate (for 40% water savings) and patented zero maintenance nozzle make them perfect for institutional-public use.

Several thousand of these shower heads are in use at large correctional facilities. The solid brass, vandal-resistant devices were designed to the specifications of prison officials. Their dramatic water and energy conservation will stretch any facility's budget, and the pleasing quality of the shower spray will stifle complaints one sometimes hears about low flow shower heads.

 * Accuracy of flow rate is ± 10% between 30 psi and 80 psi

GO TO OUR CORRECTIONAL SHOWERHEADS STORE

NOTE:  If you aren't sure which model to order, or you have questions regarding thread size or configuration, please contact us.

architect, facilities manager, or contractor spec sheet correctional showerhead architect, facilities manager, or contractor spec sheet correctional showerhead (1106 KB)

Download a PDF brochure showering performance statistics:

Herlong Correctional Institute Case Study Herlong Correctional Institute Case Study (1063 KB)

 



Institutional Testimonial

Case Study: Herlong FCI

3,500,000 Gallons of Water Saved in 2010.

Payback Period: Less Than 3 Months

Number of Inmates: 1,200
Payback Period: Less Than 3 Months.

Before Retrofit
Total Number of 2.5GPM Shower heads: 225

Total Annual Water for Showers Usage: 10M Gallons.

Estimated Cost to Heat 10M Gallons: $150,000

After Retrofit
Total Number of 1.5 GPM Highsierra Shower Heads: 225

Total Annual Water for Showers Usage: 6.5M Gallons.

Estimated Cost to Heat 6.5M Gallons: $97,500

Cost of 225 1.5 GPM Shower Heads: $10,000

Water Savings: 3,500,000 Gallons
Heating Savings: $52,500


Shower Head Testimonial from the facilitites manager of a large university:

"We have installed about 1500 of your 1.5 gpm shower heads to retrofit most of the shower stalls of our residential buildings. Our staff had tested the performance of different heads in the market and chose yours for its full flow feeling and usability such as washing the shampoo off.

"The conversion was completed before the Fall, and after two months of use we have not heard of any dissatisfaction with them.

"At the University of California at Santa Cruz we have a mandate to save a large percent of water, and this conversion from 2.5 gpm to 1.5 gpm will go a long way towards that." -- Tarun B.”