High Sierra's
Hose Connector Installation
Optional Visual Demonstration:
This video illustrates the installation process described below. All instructions and important product information are provided in the accessible text on this page.
How to install the Shower Hose Connector
High Sierra® The Feel Good, Low Flow Showerheads
No need for plumber’s tape. Rubber gaskets included.
- Thread connector into hose fitting by hand (clockwise) as far as possible.
- Finish tightening connector with an adjustable, flat-jaw wrench or a 7/8-inch open wrench.
- While holding the adapter with a wrench, thread the second hose onto the connector.
- Adjust extension to desired height.
- Thread showerhead to extension.
- Tighten with the included wrench. One and a half turns is usually enough.
- Adjust showerhead to desired angle.
Metal threads can be sharp. We recommend using gloves when installing.