High Sierra's Classic Fixed Shower Head Installation
Optional Visual Demonstration:
This video illustrates the installation process described below. All instructions and important product information are provided in the accessible text on this page.
High Sierra's Classic fixed showerhead
Enjoy your new High Sierra® Classic™ showerhead!
High Sierra’s shower heads all feature a unique, patented nozzle. They split water into two streams and collide them, making a drenching spray of large, heavy droplets.
Patented Full Coverage Spray (FCS™) technology delivers the perfect shower experience!
- Full, Invigorating Spray of Large, Rain-Like Drops
- Never Clogs*
- Solid Metal Construction
- Saves Water and the Energy to Heat It
- Huge range of motion
- Super easy to adjust
- Fast Payback In Savings Usually Under 3 Months**


- U.S. Patent #7,185,830
- *Sand or finer particles will pass through
- **Savings depend on size of family, amount of water used, etc.
Easy 4-Step Installation
- No teflon tape required.
- Connect to any 45° and 90° shower arms.

Remove old shower head by turning it counter-clockwise (wrench may be required).

Run water through the shower arm for 5-10 seconds to clear any foreign debris that may be in the pipe.

Thread shower head onto shower arm, by hand (clockwise), as far as possible.

Further tighten 1-2 turns using our High Sierra wrench (A-side). If leaks appear around the threads, additional tightening with the wrench may be required.